Standard Galvanised Straps

Please select from the options above.

For lateral and vertical restraint against wind pressure and suction. Tie timber to brickwork or blockwork at floor level, eaves or ridge level.

In masonry, use hardened nails or wall plugs and screws. In timber use 8 swg x 75mm nails or No. 12 x 50mm wood screws. Where there is a gap between the wall and the joist running parallel to it, and a strap is being used across the joists, the gap should be packed and noggins provided between joists being secured.

Manufactured from galvanised steel.
6mm holes at 25mm offset centres.

There are no downloads for this product.